BlisSter v3 - Mister add
BlisSTer v3
BlisSter v3 - Mister add
BlisSter v3 - Mister add
BlisSter v3 - Mister add
Bliss-Box

BlisSTer v3

Sale price$79.00

The BlisSter v3 board is identical to the v2 with a few Improvements

  • The LEDs now show LED status
  • The power module is built-in and now protects for ESD. It does not protect against over voltage, use 5v only
  • USB VBUS is now implemented
  • The switch is extruded out an additional 1mm


The BlisSTer is a USB Hub board with integrated Gamer-Pro Logic chips and ports. The BlisSTer features an interface to Bliss-Box's LLAPI (Low Level API) taking advantage of many direct features and data from the Bliss-Box chips without the need of using USB. This means no USB lag at all!

This add-on is intended for use with LLAPI cores maintained by Ricardo and other volunteers. Bliss-Box is not involved in the implementation of the software itself. Should you encounter any issues with the software, please contact Ricardo directly for assistance. Bliss-Box solely provides support for hardware-related inquiries only.

Why BlisSTer

  • Play MiSTer cores via USB with Fast polling.
  • Play Forked cores and have the controller interact in the way they would with original hardware.
  • Use original controllers or any other controllers to play a core and seamlessly be able to use them navigating the OSD and then straight into a game?  
Why LLAPI

Why rely on USB polling when you can experience the game in the way original consoles would interact with the controller? With LLAPI cores you can do this! With the BlisSTer you could still use USB mode, but would you when you can have controllers synced up with the frame rate of the game you're playing - just like the actual console! It is like using SNAC with the freedom to use any controller you want. 

Product Features:

  • 5 x USB 2.0 ports
  • Standard USB connection and polling rates
  • 2 x Bliss-Box ports (HDMI form factor) to be used with our cables
  • Use original controllers with adapter cables
  • Seamless swapping from LLAPI to USB 
  • Upgrade/Reset button for each Bliss-Box port
  • Power switch for entire MiSTer device
  • Micro-USB 3.0 user port for LLAPI mode

Includes:

1 x BlisSTer v3
1 x USB Micro to micro bridge
1 x USB 3.0 user port cable
1 x 5v barrel to barrel connector
4 x Stand off's (M3 14mm)

Warning: Do not use a 12v source!

See this link for more info about setup and use of the BlisSTer. 

MiSTer Pi info.

You will need:
1x Female barrel power jack to USB-C
1x USB-A to Micro USB


 

Known before you buy!

 

Product Manual

You may also like

Our Money-Back Return Policy

We want you to be fully satisfied with your purchase. You may receive a full refund for any unsatisfied order within 15 days minus the shipping costs. Bliss-Box does not supply return shipment lables or refund shipping paid out. A restocking fee may occur for any non-defective refunds past the 15 days of the arrival shipment. You must return it with all original packaging. Please contact us for RMA eligibility for any defective items purchased on Bliss-Box’s page past 15 days. Any approved RMA within 90 days is covered free of charge. Any repair beyond 90 days cannot be covered. NOTICE:  Bliss-Box cannot support or endorse any modified firmware. If you are running a custom or modified firmware it will void your warranty. Bliss-Box does not extend this return policy to any refurbished items. 

World wide shipping

We use USPS for shipping to make it affordable to all. If you are buying from outside the US please be advised it can take a few months to arrive but is normally 3 weeks.

Customer service

We have many options for support, see our contact page for details.

Refer a friend

Our company runs on word of mouth. The more you like our products, the more you will want to talk about it. So spread the word!

Secure payment

We should have a payment method that works for you. If there are any concerns, please contact us.